Are you looking for a simple and non-invasive way to detect SARS-CoV-2 nucleocapsid protein antigen?
Look no further than the iHealth COVID-19 Antigen Rapid Test. How to use iHealth Covid test?
With only four easy steps and 15 minutes, you can have accurate results without having to collect a sample from deep in your nasal cavity.
To begin the test, open the package and take out the COVID-19 Test Card in Pouch, the Tube pre-filled with the extraction solution, and the Swab.
When you’re ready to proceed with the test, open the swab package and hold it on the opposite end from the round part.
Then, remove the orange cap from the tube and place the swab in the liquid.
Stir it around 15 times before removing the clear cover on the orange cap and squeezing three drops onto the round circle on the test card.
It’s important to note that the iHealth COVID-19 Antigen Rapid Test is designed for healthcare professionals and trained personnel to use.
However, the process is simple enough that you can self-test at home with ease. Keep reading to learn more about how to use the iHealth COVID-19 Antigen Rapid Test and get accurate results in just 15 minutes.
What is iHealth COVID Test?
If you’re looking for a quick and easy way to test for COVID-19, the iHealth COVID Test may be just what you need.
This test is a rapid antigen test that uses lateral flow immunoassay technology to detect the presence of the nucleocapsid protein from SARS-CoV-2.
The iHealth COVID Test is designed to be simple to use, even if you’ve never taken a COVID-19 test before.
You can use it at home or in other settings, and you should get your results in just 15 minutes.
To use the iHealth COVID Test, you’ll need to collect a sample from your nasal secretions using the swab provided.
The swab is then inserted into a test tube containing a liquid, and the liquid is then dropped onto the test cassette. After 15 minutes, you can read your results from the cassette.
It’s important to note that the iHealth COVID Test is not a substitute for professional medical advice, diagnosis, or treatment.
If you have symptoms of COVID-19 or have been exposed to someone who has tested positive, you should seek medical attention and follow the guidance of your healthcare provider.
Preparing for the Test
Before taking the iHealth COVID-19 Antigen Rapid Test, it’s important to prepare properly to ensure accurate results.
Here are some steps to follow:
Gather the Materials
First, gather all the necessary materials. You’ll need the COVID-19 Test Card in Pouch, the Tube pre-filled with the extraction solution, and the Swab.
Make sure you have everything ready before you start the test.
Wash Your Hands
Before starting the test, it’s important to wash your hands thoroughly with soap and water.
This will help prevent any contamination that could affect the test results.
Dry your hands with a clean towel or air dry them.
Prepare the Testing Area
Choose a clean, well-lit area to perform the test. Make sure you have a flat surface to work on, such as a table or countertop.
Lay out all the materials you gathered in the previous step.
Once you have everything ready, you can proceed with the test.
Remember to follow the instructions carefully to ensure accurate results.
How to Use iHealth Covid Test
If you suspect you have contracted COVID-19, it is essential to get tested as soon as possible.
One of the most popular and reliable tests available is the iHealth COVID-19 Antigen Rapid Test.
Here is a step-by-step guide on how to use it.
Open the Test Kit
The iHealth COVID-19 Antigen Rapid Test comes with a test card, a tube filled with extraction solution, and a swab. Open the package and take out all the components.
Make sure you have everything you need before starting the test.
Collect the Sample
Remove the swab from its packaging and hold it by the opposite end from the round part.
Place the swab in your nostril and rotate it around 5 times.
Repeat the process with the same swab in the other nostril. Be sure to collect enough material from both nostrils.
Next, remove the orange cap from the tube containing the extraction solution.
Insert the swab into the liquid and stir it around 15 times. Be sure to mix the sample thoroughly.
Insert the Sample into the Test Cartridge
Remove the clear cover on the orange cap and squeeze three drops of the sample onto the round circle on the test card.
Wait for 15 minutes for the results to appear.
A positive result means that you have contracted COVID-19, while a negative result means that you have not.
It is important to note that the iHealth COVID-19 Antigen Rapid Test is not always 100% accurate.
If you have any doubts or concerns about your test results, contact your healthcare provider immediately.
In conclusion, taking the iHealth COVID-19 Antigen Rapid Test is a simple and straightforward process.
By following these steps, you can get accurate results in just a few minutes.
Remember to always follow the instructions carefully and seek medical attention if necessary.
Reading the Results
Once you’ve completed your iHealth COVID-19 Antigen Rapid Test, it’s time to read the results.
Here’s what you need to know:
Wait for the Results
After you’ve taken the test, you’ll need to wait for 15 minutes for the results to appear.
It’s important to avoid touching the test device during this time.
You can use this time to dispose of the swab and other materials used during the test.
Interpret the Results
When you’re ready to read the results, you’ll need to look at the test device.
The iHealth COVID-19 Antigen Rapid Test has two lines: a control line (C) and a test line (T).
Here’s what each line means:
- Control line (C): This line will always appear, regardless of whether you have COVID-19 or not. It indicates that the test has worked correctly.
- Test line (T): This line will only appear if you have COVID-19. If the test line is visible, it means that the SARS-CoV-2 nucleocapsid protein antigen has been detected in your sample.
Here’s what to do based on the results:
- One line (C): If only the control line is visible, it means that you do not have COVID-19.
- Two lines (C and T): If both the control line and the test line are visible, it means that you have COVID-19.
It’s important to note that the iHealth COVID-19 Antigen Rapid Test does not differentiate between SARS-CoV and SARS-CoV-2. It only detects the SARS-CoV-2 nucleocapsid protein antigen.
If you receive a positive result, it’s important to follow the guidelines provided by your healthcare provider or local health department.
You may need to isolate yourself from others to prevent the spread of the virus.
If you receive a negative result but are experiencing symptoms of COVID-19, you should contact your healthcare provider.
A negative result does not necessarily mean that you do not have COVID-19, and you may need to take additional tests or follow-up with your healthcare provider.
Overall, the iHealth COVID-19 Antigen Rapid Test is a quick and easy way to test for COVID-19.
By following the instructions carefully and reading the results accurately, you can help protect yourself and those around you from the spread of the virus.
Key Takeaways
Here are some key takeaways to keep in mind when using the iHealth COVID-19 Antigen Rapid Test:
- Follow the instructions carefully: Make sure to read the instructions that come with the test kit carefully before starting the test. It is important to follow the instructions exactly as directed to ensure accurate results.
- Prepare the testing area: Before starting the test, make sure that you have a clean and well-lit area to work in. You will need a timer, a clean tissue, and a place to dispose of the used test kit.
- Use the correct version of the test kit: There are two versions of the iHealth COVID-19 Antigen Rapid Test kit available. Make sure that you use the correct version of the test kit as directed in the instructions.
- Collect the sample correctly: The test requires a nasal swab to collect a sample. Make sure to insert the swab correctly into your nostril and rotate it several times to collect the sample.
- Interpret the results correctly: The test results will be ready in 15 minutes. Make sure to read the results within the specified time frame and interpret them correctly. A positive result means that you have the SARS-CoV-2 virus, while a negative result means that you do not have the virus.
- Keep a record of your results: The iHealth COVID-19 Antigen Rapid Test app allows you to save your test results. You can share this record with your healthcare professional as proof of COVID-19 testing.
- Dispose of the used test kit properly: Once you have completed the test, make sure to dispose of the used test kit properly. Follow the instructions in the kit to dispose of the test kit safely.
By following these key takeaways, you can ensure that you use the iHealth COVID-19 Antigen Rapid Test correctly and get accurate results.
Remember, if you have any questions or concerns about the test, consult with your healthcare professional.